Select the desired option, then click Add to Cart or Buy. Go to the cart page and click Checkout. Fill in your contact and shipping details, select a payment method and complete the payment. After confirmation, you will receive a notification to the specified email address.

How does delivery work?

We support home delivery. We have multiple delivery methods, each with its own price and timeframe — you can choose the one that suits you best. All the details for each method are shown right below it at checkout.

A1-SLWF-09 Modular LED Controller Mic Ethernet PoE

The modular LED controller that grows with you. Start with Wi-Fi and a strip; click in wired Ethernet, PoE power or a sound-reactive microphone whenever you need them. Pre-flashed with WLED — millions of colours, hundreds of effects, and your smart home in the loop. No hub, no cloud, no subscription.

What you can do with A1-SLWF-09, in a nutshell:

You start with a base model device, which has the following characteristics:

Modular: The user can install Ethernet, POE, and Digital microphone modules.
Slim and very ‘hiding’ device. We intentionally did not put any marks on top of the enclosure, so users can install them on a white wall, and they will not catch a lot of attention.
Fast wire terminal – just one click – and your LED strip or power strip is connected, no screws.
It can be powered by Type-C PD/QC (only with smart technology) – because the device has a switch and can choose either 5V or 12V! Yes, you can power a 12V LED strip via Type-C (requires PD / QC power supply). Cool, isn’t it?
It can be powered by PoE. We recommend limiting to limit by 1.5-2A. Only 5V strip (WS2812, etc).
Relay: It has a physical MOSFET relay (GPIO33). Also, you can use the available wire terminal to bypass the Relay.
Has two outputs to Addressable LED strips (with level-shifters).
Two buttons to control the device
DIY screw terminal header

Key Features

Modular Add-on Support — Optional plug-in boards for Ethernet, PoE, and digital microphone. Install only what you need.
ESP32 Power — Powered by an ESP32 SoC with 16 MB of flash memory.
WLED Ready — Preinstalled WLED firmware for easy setup, vibrant effects, and sound-reactive modes.
LED Compatibility — Supports WS2812B, SK6812, APA102, and other addressable LED strips from 5V–24V.
Multi-Channel Control — Two hardware LED channels, expandable up to 6 via GPIO.
Smart Home Integration — Works seamlessly with Home Assistant and other systems via Wi-Fi or optional Ethernet.
Flexible Power Options — USB-C with PD support, screw terminal (VIN), or optional PoE through the add-on board.
Audio-Reactive Support — Optional ICS-43432 I²S MEMS digital microphone enables synchronized music-reactive lighting.
Robust Connectivity — Optional Ethernet using the LAN8720 PHY with hardware-level isolation.
Developer Friendly — UART auto-flashing via USB-C, exposed GPIOs for expansion, and labeled headers for all modules.

What you can do with A1-SLWF-09, in a nutshell:

You start with a base model device, which has the following characteristics:

Modular: The user can install Ethernet, POE, and Digital microphone modules.
Slim and very ‘hiding’ device. We intentionally did not put any marks on top of the enclosure, so users can install them on a white wall, and they will not catch a lot of attention.
Fast wire terminal – just one click – and your LED strip or power strip is connected, no screws.
It can be powered by Type-C PD/QC (only with smart technology) – because the device has a switch and can choose either 5V or 12V! Yes, you can power a 12V LED strip via Type-C (requires PD / QC power supply). Cool, isn’t it?
It can be powered by PoE. We recommend limiting to limit by 1.5-2A. Only 5V strip (WS2812, etc).
Relay: It has a physical MOSFET relay (GPIO33). Also, you can use the available wire terminal to bypass the Relay.
Has two outputs to Addressable LED strips (with level-shifters).
Two buttons to control the device
DIY screw terminal header

Key Features

Modular Add-on Support — Optional plug-in boards for Ethernet, PoE, and digital microphone. Install only what you need.
ESP32 Power — Powered by an ESP32 SoC with 16 MB of flash memory.
WLED Ready — Preinstalled WLED firmware for easy setup, vibrant effects, and sound-reactive modes.
LED Compatibility — Supports WS2812B, SK6812, APA102, and other addressable LED strips from 5V–24V.
Multi-Channel Control — Two hardware LED channels, expandable up to 6 via GPIO.
Smart Home Integration — Works seamlessly with Home Assistant and other systems via Wi-Fi or optional Ethernet.
Flexible Power Options — USB-C with PD support, screw terminal (VIN), or optional PoE through the add-on board.
Audio-Reactive Support — Optional ICS-43432 I²S MEMS digital microphone enables synchronized music-reactive lighting.
Robust Connectivity — Optional Ethernet using the LAN8720 PHY with hardware-level isolation.
Developer Friendly — UART auto-flashing via USB-C, exposed GPIOs for expansion, and labeled headers for all modules.

A1-SLWF-09

Key Features

Frequently Asked Questions

A1-SLWF-09

Key Features

Complete the Set

Frequently Asked Questions

Complete the Set