SLZB-U2L

SLZB-U2L — USB-to-Ethernet / Wi-Fi bridge for Zigbee, Z-Wave, Thread and LoRa sticks

The USB stick that runs your Zigbee or Z-Wave devices normally has to sit next to your computer, often in the worst spot of the house. The SLZB-U2L sets it free: plug the stick into the box, connect the box to your home network, and put it wherever the signal is best. Your smart-home system (Home Assistant, Zigbee2MQTT, Z-Wave JS and others) finds the stick over the network and works as before.

Setup is guided in the web browser: no app, no account, no cloud. Everything stays inside your home network.

Key Features

• 3 × USB-A host, 1 × USB-C host, 1 × USB-C device port
• One USB device is passed through at a time; you select the active stick in the web interface. Two CP2102-based sticks can run at the same time
• Wi-Fi 2.4 GHz; Ethernet 10/100 (RJ45) and PoE as optional modules
• Ethernet-to-Wi-Fi bridge
• SLZB-OS pre-installed: WireGuard VPN, DDNS, OTA updates, LED control, multilanguage web interface
• ESPHome supported
• Carries Zigbee and Thread sticks (SLZB-07 series), Z-Wave sticks including Long Range, and 433 MHz LoRa receivers
• Supported USB chips: CH34x, CP210x, CDC-ACM and more
• Board size approx. 131 × 49 mm

Please Note

• The base unit connects over Wi-Fi and USB. The wired Ethernet port, PoE power and the 4G/LTE uplink (in development) are optional modules.
• The optional 4G/LTE module shares the USB channel with the sticks; only one of the two is active at a time.