A1-SLWF-09
LED controllers
81.00₾
The modular LED controller that grows with you. Start with Wi-Fi and a strip; click in wired Ethernet, PoE power or a sound-reactive microphone whenever you need them. Pre-flashed with WLED — millions of colours, hundreds of effects, and your smart home in the loop. No hub, no cloud, no subscription.
What you can do with A1-SLWF-09, in a nutshell:
You start with a base model device, which has the following characteristics:
- Modular: The user can install Ethernet, POE, and Digital microphone modules.
- Slim and very ‘hiding’ device. We intentionally did not put any marks on top of the enclosure, so users can install them on a white wall, and they will not catch a lot of attention.
- Fast wire terminal – just one click – and your LED strip or power strip is connected, no screws.
- It can be powered by Type-C PD/QC (only with smart technology) – because the device has a switch and can choose either 5V or 12V! Yes, you can power a 12V LED strip via Type-C (requires PD / QC power supply). Cool, isn’t it?
- It can be powered by PoE. We recommend limiting to limit by 1.5-2A. Only 5V strip (WS2812, etc).
- Relay: It has a physical MOSFET relay (GPIO33). Also, you can use the available wire terminal to bypass the Relay.
- Has two outputs to Addressable LED strips (with level-shifters).
- Two buttons to control the device
- DIY screw terminal header
Key Features
- Modular Add-on Support — Optional plug-in boards for Ethernet, PoE, and digital microphone. Install only what you need.
- ESP32 Power — Powered by an ESP32 SoC with 16 MB of flash memory.
- WLED Ready — Preinstalled WLED firmware for easy setup, vibrant effects, and sound-reactive modes.
- LED Compatibility — Supports WS2812B, SK6812, APA102, and other addressable LED strips from 5V–24V.
- Multi-Channel Control — Two hardware LED channels, expandable up to 6 via GPIO.
- Smart Home Integration — Works seamlessly with Home Assistant and other systems via Wi-Fi or optional Ethernet.
- Flexible Power Options — USB-C with PD support, screw terminal (VIN), or optional PoE through the add-on board.
- Audio-Reactive Support — Optional ICS-43432 I²S MEMS digital microphone enables synchronized music-reactive lighting.
- Robust Connectivity — Optional Ethernet using the LAN8720 PHY with hardware-level isolation.
- Developer Friendly — UART auto-flashing via USB-C, exposed GPIOs for expansion, and labeled headers for all modules.
